Covering the events of Hayabusa's return involved a lot of watching and waiting. Rather than go blind staring at my computer and cause carpal tunnel syndrome by excessively clicking the refresh button, I decided to...go blind and develop carpal tunnel syndrome by doing some crocheting. Ahem. Maybe not the best choice of alternative activities, but it was an enjoyable way to channel my caffeinated energy.
I recently discovered amigurumi -- the Japanese craft of making little anthropomorphized stuffed crocheted creatures -- from a GeekDad post about some awesome Star Wars amigurumi. (I bought the patterns, but haven't finished any yet.)
If you'd like to make your own Hayabusa amigurumi, here's how I did it -- the below doesn't have the full detail provided in the usual crochet pattern you can buy in a store, but it should be enough for an experienced crocheter to work with. To see how I did mine, here are links to the steps I posted to TwitPic:
Materials: yarn: gold, blue, gray, white, tiny bit of black (I used sport weight, but worsted would work fine). Two 7mm safety eyes. Two bamboo skewers (the type used for barbecuing). Yarn sewing needle, some stuffing, some tacky glue, and whatever size crochet needle you need to use to achieve a tight gauge (I used D, 3.25 mm).
General instructions: amigurumi are crocheted in the round -- rather than joining rows, it's crocheted in one continuous spiral. Every stitch is a single crochet (sc).
Spacecraft bus: Use gold yarn. Make a magic ring with 6 sc. Next row: 2 sc in each. Next row: 3 sc in next sc, 1 sc in each of next 2, repeat around. Next rows, keep putting 3 sc in each corner st, otherwise sc in each sc -- your goal is to make a square. Once square is just about big enough for the base of the spacecraft, do 1 row with 5 sc in the corner stitch.
Next 2 rows: sc around except decrease 1 stitch over each corner. (You're trying to make a box shape -- this is to narrow its center to help counteract the tendency of the stuffing to make the center of the box bulge outward.) Then carry on sc around and around until the spacecraft is about as tall as the width of the base. In the next 2 rows, inc 1 st in each corner by doing 2 sc in corner st. In the next row, decrease 4 stitches in the corner stitch.
Switch to gray yarn. In next rounds, decrease 2 stitches in each corner until you have 12 stitches left. Insert the two bamboo skewers through the piece so that they run across the inside of one side of the spacecraft bus (it is much easier to put in the skewers before you stuff than after). Stuff the piece very tightly, trying to poke extra stuffing into the corners. Sc 2 sts together around, fasten off yarn leaving a bit of a tail, then use the tail to sew the final hole shut.
Ion engines (make 4): Use gray yarn. Make a magic ring with 6 sc. Next row: sc around, crocheting only into the front of the stitches (this helps curve the sides of the engines inward to make them shaped like little rockets). Fasten off. Use the yarn tails to sew the four engines in a square shape on the gray end of the spacecraft bus.
Sample horn: Use gray yarn. Make a magic ring with 6 sc. Sc around, making a skinny tube, until you think it's just about long enough (maybe a little shorter than the depth of your spacecraft bus). Last row: 2 sc in each sc. Fasten off. Use a bit of gray yarn to stuff the inside, which helps to stiffen it. Sew to the bus on the side of the spacecraft bus opposite to the side having the skewers, toward the end opposite to the engines.
Sample return capsule: Use gold yarn. Make a magic ring with 6 sc. Next row: 2 sc in each st. Next row: 2 sc in next st, sc in next st; repeat around. Next row: 2 sc in next st, sc in each of next 2 st, repeat around. For mine that was big enough for the sample capsule. Fasten off and sew to the end of the bus opposite to the engines. You may want to stuff a bit of gray yarn inside to signify the asteroid material we hope it contains!
Solar panels (make 2): Use blue yarn. Chain 20, join to form a ring. Sc around and around and around until you have a tube a bit longer than the spacecraft bus. Fasten off. Press flat and use the ends of the yarn to sew the tube closed so that you have a single flat rectangular piece.
Attach a piece of gray yarn to the skewer close to the spacecraft bus. Use the yarn to sew the solar panel to the skewer, paying attention to the neatness of your stitches on the side of the panel opposite the skewer. I did one line of stitches, then I used some tacky glue to hold the stitches down to the skewer; once it dried, I did a second line of stitches on top of the first, making a row of X's in a line on the solar panel (like cross stitching).
Antenna: Use white yarn. Make a magic ring with 6 st, next row 2 sc in each st...you get the drill. Make it about as wide as the spacecraft bus and fasten off. Attach the two safety eyes and use the black yarn to sew a mouth. Sew it to the spacecraft bus and voila, you're done!