Emily LakdawallaMay 16, 2019

Lunar Reconnaissance Orbiter Images Beresheet Impact Site

Ouch.

Beresheet impact site on the Moon, before and after
Beresheet impact site on the Moon, before and after Before and after comparison of the landing site as seen by Lunar Reconnaissance Orbiter Camera. Date in lower left indicates when the image was taken. It appears the spacecraft landed from the north on the rim of a small crater, about a few meters wide, leaving a dark "smudge" on Mare Serenitatis that’s elongated towards the south.Image: NASA / GSFC / ASU

Lunar Reconnaissance Orbiter has successfully imaged the impact site of the Beresheet lander, which made a really good run at performing the first privately funded Moon landing on 11 April, but crashed after the failure of its main engine. What can we learn about the end of Beresheet from the photo? Mark Robinson explains over at the Lunar Reconnaissance Orbiter Camera website what he sees in the image. It helps to ratio the "before" and "after" images, comparing the value of each image pixel by pixel. Where the impact brightened the surface, it appears light; where the impact darkened the surface, it appears dark; where there was no change, it's medium gray.

Changes to the lunar surface from the Beresheet impact
Changes to the lunar surface from the Beresheet impact Left: Beresheet impact site as seen by Lunar Reconnaissance Orbiter on 22 April 2019. Right: An image processed to highlight changes near the landing site among photos taken before and after the landing, revealing a white impact halo. Other craters are visible in the right image because there is a slight change in lighting conditions among the before and after images. Scale bar is 100 meters. North is up. Both panels are 490 meters wide.Image: NASA / GSFC / ASU

The first thing you can learn is the location of Beresheet's final resting place: 32.5956°N, 19.3496°E, at an elevation of about 2,613 meters. Robinson also reads what he can from the shape of the dark smudge and bright halo:

The point of impact is marked by a dark smudge about 10 meters across, where the surface reflectance was lowered by about 10%. At the scale of the [narrow-angle camera] image we cannot detect a crater; perhaps there is one but it is simply too small to be seen, or the low angle of impact (less than ten degrees relative to the surface), the fragility of the spacecraft, and the velocity precluded crater formation (think gouge rather than crater). The smudge is likely a roughened surface (more micro-shadows) due to the impact and disintegration of the lander. Surrounding the smudge is an area of increased reflectance (up to 20% higher). This ragged zone spans 30 to 50 meters from the smudge and includes a ray that extends southward about 100 meters. The higher reflectance was likely caused by gases or very fine high-speed particles rapidly moving away from the impact site, which smoothed the upper layer of regolith and redistributed fine soil particles, which in turn increased reflectance.

Beresheet1, a private Israeli Moon mission

Beresheet1 was a private Moon lander by Israeli non-profit SpaceIL that crashed on the surface in 2019.

Let’s Go Beyond The Horizon

Every success in space exploration is the result of the community of space enthusiasts, like you, who believe it is important. You can help usher in the next great era of space exploration with your gift today.

Donate Today