WHAT WE DO

JOINRENEWJOIN

 

The Planetary Society Blog

By Emily Lakdawalla




Progress -- with pictures! -- on IKAROS' sail deployment

Jun. 9, 2010 | 07:19 PDT | 14:19 UTC
We need your help.
Please donate to support our blog, website, and podcast.
RSS 2.0 News Feed

Several pictures from the sail deployment monitoring cameras showed up on the IKAROS blog overnight. Here's one of four showing what looks like good halfway progress on the "first stage" of the deployment, when the tip weights were midway through pulling the folded sails outward. Lou Friedman tells me these were taken a couple of days ago.

IKAROS first stage deployment halfway complete (Cam 1)
IKAROS first stage deployment halfway complete (Cam 1)
A view from one of the four sail monitoring cameras on IKAROS shows the folded sail being pulled outward from the spacecraft as it should be. Credit: JAXA / JSPEC
And here's a helpful diagram showing (in blue) the field of view of one of the cameras. You can visit the blog to see the views from the other three cameras.
Field of view of the IKAROS sail monitoring camera at half deployment
Field of view of the IKAROS sail monitoring camera at half deployment
Credit: JAXA / JSPEC
This next image (posted slightly later) is a bit harder to interpret. First, the photo:
IKAROS sail deployment
IKAROS sail deployment
This is a view from one of the sail monitoring cameras on IKAROS on June 9, following expansion of the sail. Credit: JAXA / JSPEC
On first glance, it looks like something has gone wrong, like a sail has kinked in half and two tethers have gotten tangled. But after comparing the view to the artwork of the solar sail (see below), I think that the photo actually shows things looking as they should. We're looking at the sail with a very foreshortened perspective from a very wide-angle camera, much like the way the rovers' Hazcams see fish-eyed views of the terrain in front of them. There's a square hole in the center of the sail, and that occupies most of the foreground, with two tethers floating in that space, not yet pulled taut; one pointy corner of the square sail is in the far distance, washed out in the bright sunlight. We'll hopefully get a better view of the sails once they activate their two deployable cameras, which should obtain a less severely foreshortened view.

Anyway, this looks like great progress for JAXA!
IKAROS
IKAROS
Credit: JAXA
Reader Lionel Ward helpfully provided a translation of the explanation posted with this image: "These are photographs taken after yesterday's completion of primary deployment. Due to intense sunlight, in the photograph there is the appearance that the two tethers connecting the sails to the probe's body are piled on top of each other. However, since the side of the sail close to the probe's body is in shadow, and the incident light there is weaker, we can confirm that the tether and membrane harness are photographed."

Post this page to: del.icio.us Yahoo! MyWeb Digg reddit Furl Blinklist Spurl

Comments

??
What's that in the first image? Part of the craft?
#1 - Roman - 06/09/2010 - 10:52
I demand a cute manga representation like Hayabusa has! :)

I really hope the unfurling goes to plan.
#2 - Ian Monroe - 06/09/2010 - 10:57
I just saw on your twitter that it did deploy all the way. Huzzah!

But of course... PICS OR IT DIDN'T HAPPEN
#3 - Ian Monroe - 06/09/2010 - 11:08
It's not broken!
Check out this 13 minute video about the IKAROS project. It's all in Japanese but the graphics are easy enough to follow. It explains every stage of the sail opening and the two images above are predicted almost exactly.

The first image is of one of the four spines of the sail heading outward from the main body of IKAROS. 1/4th of the sail is compressed in that elongated shape we see. The point of view is extremely foreshortened.

The second image is exactly as described above in this blog, and is basically the beginning stage of the complete unfurling.

http://www.youtube.com/watch?v=7_6HOqBkP2o
#4 - Rob - 06/10/2010 - 12:36
Name
E-mail (Will not appear online)
Title
Comment
To prevent automated Bots form spamming, please enter the text you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.



This comment form is powered by GentleSource Comment Script. It can be included in PHP or HTML files and allows visitors to leave comments on the website.



Emily's on Twitter! »

Sign up for email updates!
Email address:
(optional) Your name: